Blog Archives

ALMATECH MANUFACTURINGCORPORATION

2/28/2023

is in need of

(1) ELECTRICIAN

Vocational course
With Electrical Installation and Maintenance NC II
With 1 to 2 years work experience

Duties and Functions:

Install electrical machine layout in production lines
Monitor electrical company facilities

Other Instructions/ Requirements:

Resume / Biodata, Birth Certificate, SSS, Pag‐IBIG, Philhealth, TIN, Barangay & Police Clearance, Diploma / Transcript of Records

Opening Date: February 22, 2023
Closing Date: February 28, 2023

(1) QA

College level
With 1 to 2 years work experience

Other Instructions/ Requirements:

Resume / Biodata, Birth Certificate, SSS, Pag‐IBIG, Philhealth, TIN, Barangay & Police Clearance, Diploma / Transcript of Records

(5) QC ASSOCIATE

College level
With 1 to 2 years work experience

Other Instructions/ Requirements:

Resume / Biodata, Birth Certificate, SSS, Pag‐IBIG, Philhealth, TIN, Barangay & Police Clearance, Diploma / Transcript of Records

(1) QA ASSOCIATE

College graduate
With 1 to 2 years work experience
Preferably with work experience on the same field
Computer literate
Knowledgeable in MS Excel
Can work under pressure
With good communication skills

Duties and Functions:

Collect QC’s daily inspection report
Check specs inspection checking point for production
In‐charge for reject report
Perform other assigned tasks from time to time

Other Instructions/ Requirements:

Resume / Biodata, Birth Certificate, SSS, Pag‐IBIG, Philhealth, TIN, Barangay & Police Clearance, Diploma / Transcript of Records

Opening Date: February 23, 2023
Closing Date: March 23, 2023

To follow‐up the status of your application, call this number:
0909‐817‐8620

APPLY NOW !

ADRIANO CONSTRUCTION

2/28/2023

is in need of

(1) ACCOUNTING STAFF

College graduate, BS Accountancy
With 1 to 2 years work experience
Fresh graduates are welcome to apply

(1) WELDING SUPERVISOR

Male
With 3 to 4 years work experience
With welding related certificates and be able to conduct penetrant test

Duties and Functions:

Understand welding drawings and know the requirements for weld seam size and weld fillet height
Responsible for on‐site supervision and inspection, solve welding technical quality problems, and guide workers in welding operations

Other Instructions/ Requirements:

Updated CV, NC II Certificate

Opening Date: February 25, 2023
Closing Date: February 28, 2023

To follow‐up the status of your application, call this number:
0919‐085‐2609

APPLY NOW !

3CʹS INDUSTRIAL STAFFING SOLUTIONS, INC (BONETE INDUSTRIAL MFG. INC.)

2/21/2023

is in need of

(2) WAREHOUSEMAN

College graduate
With 6 months to 1 year work experience
With competent skills
Willing to be trained

Duties and Functions:

Allocate materials based on actual stocks
Separate allocated materials from stock materials
Store and arrange received materials
Conduct monthly inventory of materials
Receive import and local materials
Coordinate with warehouse clerk with regards to material updates and whereabouts
Report day to day accomplishment to warehouse supervisor
Perform other functions shall be required by immediate superior
Comply with company rules and regulations

Other Instructions/ Requirements:

Resume or Biodata, Barangay Clearance, Police Clearance, Valid ID, FAB Gate Pass

Opening Date: February 18, 2023
Closing Date: March 18, 2023

To follow‐up the status of your application, call this number:
0932‐662‐2368

APPLY NOW !

PETRON CORPORATION ‐ BATAAN REFINERY

2/21/2023

(1) PROJECT‐BASED ELECTRICAL ENGINEER

College graduate, BS Electrical Engineering
With more than 5 years work experience
Knowledgeable in power systems design and engineering calculations such as short circuit analysis, load flow calculation, motor starting analysis, relay protection coordination, and arc‐flash analysis thru the use of ETAP software
Knowledgeable in various electrical engineering codes and standards, including but not limited to IEC, IEEE, PEC, NEC, NETA, ANSI, etc.

Duties and Functions:

Interpret existing detailed engineering designs and drawings and provide assessments based on applicable engineering standards or industry best practices
Develop and prepare electrical engineering design, cost estimates, specifications, and the corresponding material requisition for new refinery projects or alterations of existing facilities
Produce electrical engineering drawings and documents such as but not limited to cable sizing and voltage drop calculation, motor sizing, transformer sizing, switchgear, and panel sizing, cable routing layout and raceway sizing, grounding and lightning calculation and layout, single and three line diagram, equipment sizing/calculation/layout, illumination
Design and lighting layout, load and cable schedule, substation layout, electrical interconnection diagram, electrical hook‐up, installation details, etc.

Other Instructions/ Requirements:

Resume, TOR and PRC Certificate with board exam rating

Opening Date: February 17, 2023
Closing Date: March 17, 2023

To follow‐up the status of your application, call this number:
0917‐862‐8522

APPLY NOW !

MOUNTAINEERING INSTRUMENTS CORPORATION

2/21/2023

is in need of

(3) SEWING MECHANIC

High school graduate
With 1 to 2 years work experience
Knowledgeable and skilled in repairing sewing machines

Duties and Functions:

Conduct roving routine in the assigned area
Repair sewing machines and special machines in the assigned area
Repair broken electric fan as needed

Other Instructions/ Requirements:

Biodata or Resume
Police Clearance
Barangay Clearance
Online Application
Vaccination Card

(14) QUALITY CONTROLLER

College level
With 1 to 2 years work experience

Other Instructions/ Requirements:

Biodata or Resume
Police Clearance
Barangay Clearance
Online Application
Vaccination Card

Opening Date: February 17, 2023
Closing Date: February 28, 2023

To follow‐up the status of your application, call this number:
0932‐276‐3579

APPLY NOW !

MEDTECS GROUP OF COMPANIES

2/21/2023

is in need of

(3) QUALITY CONTROLLER

Female
High school graduate
With 1 to 2 years work experience

Opening Date: February 18, 2023
Closing Date: March 03, 2023

(10) HELPER

Male
High school graduate
With 1 to 2 years work experience

Opening Date: February 18, 2023
Closing Date: March 18, 2023

To follow‐up the status of your application, call this number:
0910‐069‐6860

APPLY NOW !

JEPAR MANPOWER AND GENERAL SERVICES

2/21/2023

is in need of

(1) ENGINEERING STAFF

Male
College graduate, any Engineering course
With 6 months to 1 year work experience
Knowledgeable in AutoCAD

Other Instructions/ Requirements:

Resume
Barangay and Police Clearance
Vaccination Card

(1) STOREKEEPER

Male
College graduate
With 6 months to 1 year work experience

Other Instructions/ Requirements:

Resume
Barangay and Police Clearance
Vaccination Card

Opening Date: February 17, 2023
Closing Date: March 08, 2023

To follow‐up the status of your application, call this number:
0950‐924‐8041

APPLY NOW !

DLX BAGS PHILIPPINES INC.

2/21/2023

is in need of

(6) MACHINE MAINTENANCE

Male
High school graduate
With 6 months to 1 year work experience
With practical skills

Other Instructions/ Requirements:

Updated Resume/Biodata
Police Clearance/NBI
Vaccination Card

(1) CUTTING MAINTENANCE

Male
High school graduate
With 6 months to 1 year work experience
With practical skills

Other Instructions/ Requirements:

Updated Resume/Biodata
Police Clearance/NBI
Vaccination Card

(1) SPECIAL MACHINE MAINTENANCE

Male
High school graduate
With 6 months to 1 year work experience
With practical skills

Other Instructions/ Requirements:

Updated Resume/Biodata
Police Clearance/NBI
Vaccination Card

Opening Date: February 18, 2023
Closing Date: March 18, 2023

To follow‐up the status of your application, call this number:
0950‐382‐4399

APPLY NOW !

167 ARCHO RESOURCES INC.

2/21/2023

is in need of

(5) CLERK

Female
College graduate, BS Management or any related course

Other Instructions/ Requirements:

Updated Resume, Police Clearance, Vaccination Card

Opening Date: February 20, 2023
Closing Date: March 20, 2023

To follow‐up the status of your application, call this number:
0948‐830‐5607

APPLY NOW !

ADRIANO CONSTRUCTION

2/21/2023

is in need of

(1) WELDING SUPERVISOR

Male
With 2 to 3 years work experience

Duties and Functions:

Responsible for welding inspection and supervision

Opening Date: February 18, 2023
Closing Date: February 24, 2023

To follow‐up the status of your application, call this number:
0919‐085‐2609

APPLY NOW !

PHILCEMENT CORPORATION

2/21/2023

is in need of

(4) CEMENT TECHNICIAN

Male
College graduate, BS Mechanical Engineering
With 6 months to 1 year work experience

Duties and Functions:

Provide basic maintenance knowledge and services
Conduct troubleshooting to correct and restore operating condition of all machineries
Perform preventive maintenance routine (PMR) and corrective maintenance
Provide the needed technical support and assistance to pack house operators and supervisors during operation by attending to urgent request
Perform commissioning activities of newly repaired, replaced or installed electrical equipment prior to turn‐over to production

Other Instructions/ Requirements:

Resume
Vaccination card

Opening Date: February 16, 2023
Closing Date: March 16, 2023

(4) DRIVER

Male
Vocational Course
With TESDA Certification (NC III)
With 1 to 2 years work experience

Duties and Functions:

Drive articulated vehicle to any point of Luzon

Other Instructions/ Requirements:

Resume

Opening Date: February 16, 2023
Closing Date: March 02, 2023

To follow‐up the status of your application, call this number:
0951‐056‐9855

APPLY NOW !

PETRON CORPORATION ‐ BATAAN REFINERY

2/21/2023

is in need of

(1) TECHNICAL TRAINING COORDINATOR

College graduate, BS Chemical/Mechanical Engineering
With more than 5 years work experience

Duties and Functions:

Lead and supervise technical training engineers ‐ acts as their coach which includes planning their training needs and development
Facilitate technical training programs for all employees (probationary and regular) and verifies their completion
Plan, coordinate, and prepare necessary documentation of approved technical training programs
Determine, coordinate and implement relevant training intervention for employees who may require such in coordination with the immediate superiors
Coordinate and conduct competency assessment for employees, and evaluate training effectiveness
Prepare job contracts and other relevant documentation for external training vendors, who may be contracted to provide training programs for employees
Monitor the key performance measures of the technical training section and recommends necessary adjustments to improve their results.
Recommend improvement projects necessary to enhance the delivery of training services for employees

Other Instructions/ Requirements:

Resume, TOR, PRC Certificate with Board Exam Rating

(1) TRAINING ENGINEER

College graduate, BS Chemical/Mechanical Engineering
With 3 to 4 years work experience

Duties and Functions:

Conduct technical training programs for all employees (probationary and regular)
Prepare necessary documentation of approved technical training programs
Implement relevant training intervention for employees who may require such in coordination with the immediate superiors
Conduct competency assessment for employees, and evaluation of training effectiveness

Other Instructions/ Requirements:

Resume, TOR, PRC Certificate with Board Exam Rating

(1) PROJECT ENGINEERING ASSOCIATE

College graduate, any Engineering course
With 1 to 2 years work experience

Duties and Functions:

Conduct site survey to perform verification of actual site conditions which will be reflected in the technical/ detailed drawings complete with dimensions and layout of existing and new facilities for the project to be developed in coordination with project engineer
Prepare and update technical/ detailed drawings including plot plans and piping & instrument diagrams using the BricsCAD software
Prepare detailed technical/ detailed drawings considering the disciplines of: piping, mechanical, civil/ structural, electrical, and instrumentation, all with the necessary views required and material take‐off for the project to be developed in coordination with project engineer

Other Instructions/ Requirements:

Resume and TOR

Opening Date: February 16, 2023
Closing Date: March 16, 2023

(1) PROJECT‐BASED CONTROL ENGINEER

College graduate, BS Electronics Engineering
With more than 5 years work experience

Duties and Functions:

Design hardware and software including configuration, programming, installation, testing and commissioning of distributed control systems (DCS) or programmable logic controller (PLC) including interfacing systems
Perform evaluation of offer submitted by vendors and can submit technical queries to vendor
Interpret and translate existing detailed engineering design drawing and can provide clear judgement whether the design is already sufficient based on his/her understanding of best engineering practices and standards
Read P&ID, logic diagrams and programs, design and generate control engineering drawings (e.g., systems architecture, static graphics, loop drawings, control narrative, logic diagram etc.), specifications, datasheet, and requirements

Other Instructions/ Requirements:

Resume, TOR and PRC Certificate with Board Exam Rating

Opening Date: February 17, 2023
Closing Date: March 17, 2023

To follow‐up the status of your application, call this number:
0917‐862‐8522

APPLY NOW !

MOUNTAINEERING INSTRUMENTS CORPORATION

2/21/2023

is in need of

(2) PPC STAFF

College graduate
With 1 to 2 years work experience
With characteristics of a strong and firm leader in production control

Duties and Functions:

Coordinate to line leaders regarding production schedules, shipment dates, material status and priorities as needed
Act & decide on situations pertaining to production problems

Opening Date: February 16, 2023
Closing Date: February 28, 2023

To follow‐up the status of your application, call this number:
0932‐276‐3579

APPLY NOW !

MMA COMPETENT MANPOWER AND GENERAL SERVICES INC.

2/21/2023

is in need of

(2) GRASSCUTTER

Male
With 1 to 2 years work experience

Duties and Functions:

Perform routine maintenance duties such as mowing and edging grass, operating a weed eater, blowing sidewalks and parking lots

(1) OSH AIDE

With 1 to 2 years work experience as Safety Officer III
Knowledgeable in Philippine OSH Standards
With BOSH and COSH training certificates
With fist aid license is an advantage

(1) FIRE AND EMERGENCY AIDE

High school graduate
With 1 to 2 years work experience
With good interpersonal skills
With basic knowledge in basic fire safety is an advantage
With ability in proper lifting and moving
Physically fit

(1) ENVIRONMENTAL AIDE

Male
With 1 to 2 years as environmental aide / PCO aide
With driverʹs license up to Code 8
With NC II certificate in forklift operation

Opening Date: February 16, 2023
Closing Date: March 16, 2023

To follow‐up the status of your application, call this number:
0908‐811‐2735

APPLY NOW !

FCF MANUFACTURING CORPORATION

2/21/2023

is in need of

(1) PMC

College graduate
With 6 months to 1 year work experience

Duties and Functions:

Issue material production based on BOM
Monitor material delivery & ensure to arrive on time based on production plan
Follow‐up delay materials to purchasing & logistic department
Input material re‐order/replacement to EPICOR system
Resolve any material problem encounter by production

Other Instructions/ Requirements:

Police Clearance/NBI
Vaccination Card
SSS
Pag‐IBIG
Philhealth
PSA/NSO

Opening Date: February 16, 2023
Closing Date: February 28, 2023

To follow‐up the status of your application, call this number:
0981‐308‐4056

APPLY NOW !

<<Previous

JOB OPPORTUNITIES

ALMATECH MANUFACTURINGCORPORATION

ADRIANO CONSTRUCTION

3CʹS INDUSTRIAL STAFFING SOLUTIONS, INC (BONETE INDUSTRIAL MFG. INC.)

PETRON CORPORATION ‐ BATAAN REFINERY

MOUNTAINEERING INSTRUMENTS CORPORATION

MEDTECS GROUP OF COMPANIES

JEPAR MANPOWER AND GENERAL SERVICES

DLX BAGS PHILIPPINES INC.

167 ARCHO RESOURCES INC.

ADRIANO CONSTRUCTION

PHILCEMENT CORPORATION

PETRON CORPORATION ‐ BATAAN REFINERY

MOUNTAINEERING INSTRUMENTS CORPORATION

MMA COMPETENT MANPOWER AND GENERAL SERVICES INC.

FCF MANUFACTURING CORPORATION

Archives

QUICK LINKS

SERVICES

CONTACT US